Suspensions Home | Air Springs | Height Control Valves | Leaf Springs | Bushings | Steering | Shocks |
Torque Rod Replacements with Rubber Bushings by Dayton Parts
Torque rods are normally maintained by replacing the old bushings with new. When the rod itself has been damaged replacement rods are available in the exact size of the original equipment or can be made to the exact length you require by welding a female end and male end together. To learn more about the importance of torque rods for maintaining axle alignment read this tip from Dayton Parts.
If you find yourself with a torque rod that needs more than rebushing, consider replacing the old rod with an Atro torque rod using longer lasting polyurethane bushings.
If you find yourself with a torque rod that needs more than rebushing, consider replacing the old rod with an Atro torque rod using longer lasting polyurethane bushings.
Hutch 16398-04 torque rod DP 345-164
Hutch 715-00 torque rod for Trailer Suspension
Reyco 15173-01 Adjustable Torque Rod without bushings
Atro Polyurethane Bushings in Torque Rod Replacements for Original Equipment
Kenworth 925150 torque rod for Airglide 100 w. urethane bushings
Mack 17QF460P243 Air suspension torque rod w. urethane bushings
Volvo 8021378 torque rod for T-ride suspension
Atro Two-piece Torque Rods
For maximum versatility and minimum inventory a wise repair shop manager should consider stocking two-piece torque rods and have the ability to make a finished torque rod of any length up to 36". See Atro's chart for the male and female ends required to make finished torque rods. Assembly is as simple as cutting the bar on the male end with a saw. (Do not flame cut.) Remove burrs. Push the bar into the sleeve on female end. Weld sleeve to the bar. These bushings have a three year warranty and the torque rods will be able to be rebushed.
Atro TR71000 Torque Rod Female End with sleeve
Torque Rod Male End (TR75000) with bar to fit sleeve on TR71000
Below are the more popular torque rods currently in stock.
| Atro | |
| TR78000 | Two piece torque rod male end, straddle mount urethane bushing, bolt hole 25/32" |
| TR85000 | Two-piece torque rod male end, hollow sleeve urethane bushing, 1 1/8" id |
| TR96-41268 | Volvo 8021378, 8028945, 8071851 torque rod replacement w. urethane bushing |
| VR01000 | Volvo 8021378 8074268 V8071851 T-ride torque rod w. urethane bushing |
| TR60000 | Two-piece torque rod male end, no bushing |
| TR55418C1 | Navistar 3548381C1, 3580088C1torque rod replacement w. urethane bushing |
| TR59-41150 | Kenworth 925150 for Airglide 100 torque rod replacement w. urethane bushing |
| TR59-41376 | Kenworth 925031 K195-376 Airglide 100 torque rod replacement w. urethane bushing |
| TR6241243 | Mack 17QF460P243 17QF473M4 Air suspension, torque rod w. urethane bushing |
| TR62413M3 | Mack 17QF473M, Air suspension torque rod replacement w. urethane bushing |
| TR62413M4 | Mack 17QF460P225 AL Air Suspension torque rod replacement w. urethane bushing |
| TR70005 | Two piece torque rod female end, no bushing |
| TR71000 | Two piece torque rod female end straddle mount urethane bushing bolt hole 21/32" |
| Dayton Parts | |
| 345-105 | Reyco 15173-01 Torque Rod Adjustable 18 3/4''-19 1/2'' Model 21 trailer suspension |
| 345-130 | Reyco T3036, 16347-01, Hendrickson 3-1032-2 Adjustable Torque Rod 15''-17 1/4'' |
| 345-158 | Reyco 0075-20 Torque Rod Rigid 19 7/8'' Models 86 88 89 86AR trailer suspensions |
| 345-164 | Hutch 16398-04 Torque Rod, Adjustable; 18 1/2''-21'' models H/CH 7700/9700 |
| 345-165 | Hutch 16398-06 713-07 Torque Rd Adjustable 20.25-22.75'' H/CH 7700/9700 trailer |
| 345-168 | Hutch 784-02 Torque Rod, Rigid; 19 1/4'' H2200/2300 Tractor Four Spring Suspension |
