Camshafts - St. Louis Truck Driveshafts, Suspensions, Brakes 314-516-9466

Menu:

Camshafts

Picture
Preventive maintenance is necessary to insure that camshafts and bushings will provide good service during the life of a brake “reline”.  Euclid recommends that camshaft bushings be lubricated a minimum of every six months for on-highway vehicles and every four months for off-highway vehicles. See Euclid’s complete recommendations for air brake maintenance here.

At each lubrication interval missing or loose camshaft lock rings and washers should be replaced. With each brake relining inspect the camshafts for wear, roughness, or deformed splines. If camshaft bushings are worn, check the brake spider or camshaft support bracket before installing new bushings and seals. Wear in the spider or camshaft support bracket affect the fit of the bushings and help create excessive radial movement. 

Camshaft Repair Kits are designed to restore camshaft operation to its original equipment specifications, providing the camshaft itself is not excessively worn. Kits contain enough camshaft bushings, seals, washers and lock rings to service either one or two brakes.

KIT8078 camshaft repair kit
Trailer axle Repair kit 8078 for one camshaft on 16 1/2 inch 'Q' brake
1    Retainer Bushing
2    Seal
3    Outer Washer
4    Inner Washer
5    Snap Ring
6    Screw
7    Snap Ring
8    Washer
9    Retainer Bushing Assembly
10  Self Tapping Screw
            CONTENTS OF KIT 8078
Picture
Drive Axle Repair kit 8042 for TWO camshafts for 15' and 16-1/2' Q and Q plus brakes and 1-1/2' x 28' spline camshaft
1   Washer
2   Snap Ring
3   Snap Ring
4   Nylon Bushing
5   Seal
6   Oil Seal Retainer
7   Washer
8   Washer
          CONTENTS OF KIT 8042
Camshaft repair kit for 12-1/4' P, Q Meritor brakes
Camshaft repair kit 8048
Contents
Repair Kit 8048, Meritor 12-1/4", 16-1/2" P and Q brakes on trailer axles

1   Washer
2   Retainer Bushing Assembly
3   Snap Ring
4   Seal
5   O-ring
6   Outer Bushing
7   Inner Bushing
8   Snap Ring
9   Washer
10 Washer

 
Camshafts in Stock

Below are just a few of the camshafts in stock now. Call us today so that we can cross-reference a Meritor part number to the original equipment number and you can be sure of getting the correct replacement part.
Guide for specifying a camshaft
Tips for list below
Meritor PN Length Spline Brakesize Vehicle
2210J7524                   11-13/16" 1-1/2"-28 16-1/2" LH rotation, truck-tractor axle, Q Plus brake
2210H7522                   11-13/16" 1-1/2"-28 16-1/2" RH rotation, truck-tractor axle, Q Plus brake
2210W7537                   11-19/32" 1-1/2"-28 16-1/2" LH rotation, truck-tractor axle, Q Plus brake
2210V7536                   11-19/32" 1-1/2"-28 16-1/2" RH rotation, truck-tractor axle, Q Plus brake
2210R8156                   17-5/16" 1-1/2"-28 16-1/2" LH rotation, trailer, Q Plus brake
2210Q8155                   17-5/16" 1-1/2"-28 16-1/2" RH rotation, trailer, Q Plus brake
2210C6867                   17-5/16" 1-1/2"-28 16-1/2" LH rotation, trailer, P brake
2210B6866                   17-5/16" 1-1/2"-28 16-1/2" RH rotation, trailer, P brake
R607171                     23-1/2" 1-1/2"-28 16-1/2" LH rotation, Dana_Spicer, Trailer
R607172                     23-1/2" 1-1/2"-28 16-1/2" RH rotation, Dana_Spicer, Trailer
2210C7959                   23-3/8" 1-1/2"-28 15" RH rotation, trailer axle, Q Plus brakes
R607162                     23-7/8" 1-19/32"-37 16-1/2" LH rotation, Fruehauf Trailer
2210E6869                   24-1/16" 1-1/2"-28 16-1/2" LH rotation, trailer, Q Plus brake
2210D6868                   24-1/16" 1-1/2"-28 16-1/2" RH rotation, trailer, Q Plus brake
2210V8160                   24-1/16" 1-1/2"-28 16-1/2" LH rotation, trailer, Q Plus brake
2210U8159                   24-1/16" 1-1/2"-28 16-1/2" RH rotation, trailer, Q Plus brake